Journal & Conference
| Academic Year 2022-2023 | ||||
| S. No | Name of the Faculty | Title of the paper | ISBN/ISSN number of the proceeding | Name of the publisher |
| 1. | D.Deepak | Investigation on the wire EDM Characterstics of Al Matrix Composite using TOPSIS Method | 2214-7853 | Materials Today:Proceedings |
| 2. | D.Deepak | Effect of Process Parameters on Machining Behaviour using S/N ratio and ANOVA Analysis | 2214-7853 | Materials Today: Proceedings |
| 3. | Dr.R.Arravind | Taguchi Analysis in investigation of feed force, cutting force and thrust force while machining Aluminium Metal Matrix Composite | 1229-9162 | Journal of Ceramic Processing Research |
| 4. | Sasi.G | Characteristics of Fuel-Air Mixing In The Subsonic Combustion Regime With Opposed Fuel Jets For Flame Stabilization | 1551-7616 | AIP Conference Proceedings |
| 5. | Dr.R.Arravind
Sasi.G Gokulnath.K Prasanna P |
Conceptual Design and Preliminary Analysis of Turbo Jet Engine | 1551-7616 | AIP Conference Proceedings |
| Academic Year 2021-2022 | ||||
| 1. | Dr.R Arravind | An Investigation on Mechanical Properties of AA336/Al2O3 Composites By Duralcan Process | 2214-7853 | Materials Today: Proceedings |
| Sasi.G | Experimental Investigation of Propeller Performance with Propeller Surface Corrugations | 2321-581X | Research Journal of Engineering and Technology | |
| Academic Year 2020-2021 | ||||
| 1. | Gokulnath K | Performance Estimation and Redesign of Horizontal Axis Wind Turbine (HAWT) Blade. | 2214-7853 | Materials Today: Proceedings |
| 2. | Sasi G | Autonomous Drone using Pixhawk Flight Controller with Live Stream and Mask Detection Features | 2278-0181 | International Journal of Engineering Research and Technology |
| 3. | Rajkumar D | Design and Aerodynamics Analysis of plane Flaps | 2393-8021 | International Advanced Research Journal in Science, Engineering and Technology |
| 4. | Karthikeyan P | Three-dimensional Computational Analysis of Transverse Injection in a Supersonic Combustor | 1757-899X | IOP Conference Series: Materials Science and Engineering |
| 5. | Karthikeyan P | Computational analysis of hydrocarbon combustion | 2393-8021 | International Advanced Research Journal in Science, Engineering and Technology |
Academic Year 2019-2020
| Sl. No | Name of the Faculty | Title of the book/chapters published | Title of the paper book/chapters published | Title of the proceedings of the conference | ISBN/ISSN number of the proceeding | Name of the publisher | ||
| 1 | Rajkumar D | Aircraft Materials and Manufacturing Technology | 978-93-5396-597-6 | e-Book | ||||
| 2 | Dr Arravind R | Wear Experimentation on Tantalum CarbideBbased Niobium MMC | ICRDMSA 20 | 1757-8981 | IOP Conference Series Materials Science and Engineering Publisher: IOP Publishing |
|||
| 3 | Gokulnath K | Experimental Analysis of A Vapour Compression Refrigeration System By Using Nano Refrigerant (R290/R600a/Al2O3) | ICMMM’19 | 1551-7616 | AIP Conference Proceedings | |||
| 4 | Sasi G | Performance Analysis of Corrugated Airfoil | ICMMM’19 | Bannari Amman Institute of Technology | ||||
| 5 | Dr Arravind R | Conceptual Design and Preliminary Analysis of Turbojet Engine | ICTCEES 20 | Vimal Jyothi Engineering College | ||||
| 6 | Vaishnavi TS | Design and Development of Box Tail UAV Powered with Solar Panel | ICTCEES 20 | Vimal Jyothi Engineering College | ||||
| 7 | Karthikeyan P | Analyzing the Behaviour of Natural and Artificial Composite | ICTCEES 20 | Vimal Jyothi Engineering College | ||||
Academic Year 2018-2019
| S.No | Name of the Faculty | Title of the paper | ISBN/ISSN number of the proceeding | Name of the publisher | ||
| 1 | Sasi G | Optimization of Flash Paralysis Among various Process | ICATS 2018 | Paavai Engineering College | ||
| 2 | Rajkumar D | Analysis of Landing Gear For A Typical Light Aircraft | ICATS 2018 | Paavai Engineering College | ||
| 3 | Sethunathan P | Computational Design Of Optimized Elevator To Improve Aerodynamic Effects | ICATS 2018 | Paavai Engineering College | ||
| 4 | M.Malarvizhi | Improving The Mechanical And Thermal Properties Of Epoxy Resin Using Fillers | ICATS 2018 | Paavai Engineering College | ||
| 5 | A.Anupriya | Design Of A Wind Tunnel Model For Measuring Base Drag In A Supersonic Flow | ICATS 2018 | Paavai Engineering College | ||
| 6 | Sasi G | Performance Analysis of Parafoil Surface | ICSTEM 19 | Kalaingarkarunandhin Institute of Technology | ||
| 7 | Rajkumar D | Performance Analysis of Parafoil Surface | ICSTEM 19 | Kalaingarkarunandhin Institute of Technology | ||
| 8 | Sethunathan P | Performance Analysis of Parafoil Surface | ICSTEM 19 | Kalaingarkarunandhin Institute of Technology | ||
| 9 | M.Malarvizhi | Stress sizing in Typical Semi-monocoque Structure | ICSTEM 19 | Kalaingarkarunandhin Institute of Technology | ||
| 10 | A.Anupriya | Stress sizing in Typical Semi-monocoque Structure | ICSTEM 19 | Kalaingarkarunandhin Institute of Technology | ||
Academic Year 2016-2017
| S. No. | Name of the Faculty | Title of the paper | Title of the proceedings of the conference | ISBN/ISSN number of the proceeding | Name of the publisher |
| 1 | Rajkumar D | Design Optimization and Analysis of Slat in Military Aircraft | ICSSCCET 2016 | 978-81-929866-6-1 | Karpagam Institute of Technology |
