Approved By AICTE Government of India | Affiliated to Anna University, Chennai
| S.NO | BATCH NAME | REG.NO | NAME OF STUDENT | PROJECT IDEA | AREA |
| 1 | 1 | 622121107001 | ABINAYASREE.K | FABRICATION OF LATTICE STRUCTURES VIA FUSED DEPOSITION MODELLING FOR INTEGRATED ENGINEERING APPLICATIONS | ADDITIVE MANUFACTURING |
| 2 | 622121107004 | AKASH.E | |||
| 3 | 622121107015 | GOKUL KRISHNAN .A | |||
| 4 | 622121107025 | KAVIYARASAN.S | |||
| 5 | 2 | 622121107022 | KALAISELVAN.K | THERMAL PERFORMANCE IMPROVEMENT OF COPPER HEAT SINK | THERMAL |
| 6 | 622121107029 | MANOJKUMAR.P | |||
| 7 | 622121107033 | MUHESH BHARATHI.R | |||
| 8 | 622121107038 | PITCHAI MANI.A | |||
| 9 | 3 | 622121107002 | ABINESH.S | MULTIPLE MOTOR FAULT MONITORING INFORMATION USING WIRELESS SENSOR NETWORK TO INCREASE PRODUCTION | COMPOSITE MATERIALS |
| 10 | 622121107003 | ABISHEK.A | |||
| 11 | 622121107009 | BHARANI.K | |||
| 12 | 622121107012 | BOOPATHI.P | |||
| 13 | 4 | 622121107006 | ARUN.G | ANALYSIS OF MECHANICAL PROPERTIES OF ALUMINIUM METAL MATRIX COMPOSITE (Al6068) FOR CAR FRAME | COMPOSITE MATERIALS |
| 14 | 622121107010 | BHARATH.P | |||
| 15 | 622121107017 | GOKULRAJ.V | |||
| 16 | 622121107021 | JOTHI KRISHNA.S.J | |||
| 17 | 5 | 622121107019 | HEMAHARIDHA.J | THERMAL CONDUCTIVITY ANALYSER HAND MODEL TO INTERFACE WITH LAPTOP | THERMAL |
| 18 | 622121107034 | MUTHU.M | |||
| 19 | 622121107035 | NALIN.T | |||
| 20 | 622121107037 | PALANI.A | |||
| 21 | 6 | 622121107008 | BALAJI.B | 2 WHEEL DRIVE FORKLIFT FOR WAREHOUSES | MANUFACTURING |
| 22 | 622121107018 | HARIHARAN.M | |||
| 23 | 622121107026 | KISHORE.M | |||
| 24 | 7 | 622121107030 | MOHAN.A | DESIGN FABRICATION OF SELF POWERED EV PROTOTYPE MODEL FOR PHYSICALLY CHALLENGED | MANUFACTURING |
| 25 | 622121107031 | MUGILRAJ.M | |||
| 26 | 622121107036 | NANDHAKUMAR.S | |||
| 27 | 8 | 622121107005 | ANBUMANI.K | DESIGN AND DEVELOPMENT OF MANUALLY OPERATED HYDRAULIC LIFT | MANUFACTURING |
| 28 | 622121107007 | ARUSAMY.S | |||
| 29 | 622121107027 | KISHORE.R | |||
| 30 | 622121107032 | MUGUNTHAN.A | |||
| 31 | 9 | 622121107039 | POOVARASAN.V | INVESTIGATION OF TRIBOLOGICAL PROPERTIES OF ALUMINIUM 8090 + GRAPHENE | COMPOSITE MATERIALS |
| 32 | 622121107055 | SUDHARSAN.M | |||
| 33 | 622121107061 | VIKRAM.S | |||
| 34 | 622121107308 | NAVEENKUMAR K | |||
| 35 | 10 | 622121107048 | SATHRIYAN.C | HYBRID POWER GENERATION FOR ON ROAD CHARGING WITH BESS | RENEWABLE ENERGY |
| 36 | 622121107051 | SINGADURAI.A | |||
| 37 | 622121107060 | VIGNESHWARAN.S | |||
| 38 | 622121107310 | SUJITH M | |||
| 39 | 11 | 622121107040 | PRABHU.M | EXPERIMENTAL STUDY ON HOT CORROSION RESISTANCE | COMPOSITE MATERIALS |
| 40 | 622121107050 | SHARAN.D | |||
| 41 | 622121107057 | THIRUMURUGAN.N | |||
| 42 | 622121107059 | VIGNESH NAGARATHINAM | |||
| 43 | 12 | 622121107047 | SATHISHKUMAR.V | SOLAR POWERED PROGRAMMABLE QUARTZ FURNACE FOR HIGH TEMPERATURE ELECTROSTATOR | RENEWABLE ENERGY |
| 44 | 622121107052 | SIVANESH.G | |||
| 45 | 622121107058 | THIRUSELVAN.V | |||
| 46 | 13 | 622121107043 | PRIYADHARSHINI .P | HYDRAULIC ASSIST WHEEL CHAIR | MANUFACTURING |
| 47 | 622121107049 | SETHU RAJ.R | |||
| 48 | 622121107302 | GNANESH P | |||
| 49 | 622121107309 | RAJPRAKASAM P | |||
| 50 | 14 | 622121107045 | SANJAI ADHITHYA.R | INVESTIGATION OF ALUMINIUM 2080 AND GRAPHENE METAL MATRIX COMPOSITE | COMPOSITE MATERIALS |
| 51 | 622121107056 | SURYA.S | |||
| 52 | 622121107304 | JAWAHAR V B | |||
| 53 | 622121107306 | MATHIVANAN R | |||
| 54 | 15 | 622121107041 | PRADEEPKUMAR.S | THERMAL AND MECHANICAL CHARACTERIZATION OF WAAM MANUFACTURING OF NICKEL ALLOY | COMPOSITE MATERIALS |
| 55 | 622121107053 | SIVASAKTHI.M | |||
| 56 | 622121107303 | GOWTHAM S | |||
| 57 | 622121107305 | JAYASURYA S |
Academic Year 2023-2024
| Sl.No | Batch | Reg.No | Name of the student | Title of the project | AREA |
| 1 | 1 | 20107001 | AAKASH.S | MANUAL DRIVE OF BICYCLE USING SOLAR ENERGY ALONG WITH DYNAMO AND BATTERY FOR EASY RIDE | RENEWABLE ENERGY |
| 2 | 20107008 | ANBARASAN .A | |||
| 3 | 20107013 | GOPALAKANNAN.M | |||
| 4 | 20107035 | SASIDHARAN.V | |||
| 5 | 2 | 20107015 | JANARTHANAN.K | INVESTIGATION OF THERMAL PROPERTIES OF GRAPHENE COATEDCOPPER | THERMAL |
| 6 | 20107031 | RANJITH KUMAR.V | |||
| 7 | 20107036 | SATHISH.S | |||
| 8 | 3 | 20107017 | KAVIN.S | INVESTIGATION OF GRAPHENE REINFORCED ALUMINIUM 7075 MATRIX COMPOSITE PROPERTIES | COMPOSITE MATERIAL |
| 9 | 20107022 | NAVEENKUMAR.J | |||
| 10 | 20107023 | NAVEENKUMAR.S | |||
| 11 | 20107024 | NITHESH.T | |||
| 12 | 4 | 20107006 | AKASH.G | ELECTROCHEMICAL MICROMACHINING FOR ALUMINIUM ALLOY FOR PERFORMANCE INVESTIGATION | COMPOSITE MATERIAL |
| 13 | 20107041 | SRINATH.D | |||
| 14 | 20107047 | VISHU.D | |||
| 15 | 5 | 20107002 | AAKESH KUMAR.S | SELF ELECTRICITY PRODUCED BY WATER TURBINE | RENEWABLE ENERGY |
| 16 | 20107012 | DEEPESH.M | |||
| 17 | 20107021 | MOORTHI.S | |||
| 18 | 20107029 | RAJKUMAR.K | |||
| 19 | 6 | 20107019 | MAHENDRAN.G | DESIGN AND DEVELOPMENT OF ECO SUSTAINABLE TREADMILL BICYCLE | RENEWABLE ENERGY |
| 20 | 20107020 | MOHAMED NASAR.R | |||
| 21 | 20107030 | RAJKUMAR.T | |||
| 22 | 20107032 | SARAN RAJ.T | |||
| 23 | 7 | 20107025 | PARTHIBAN.T.A | PERFORMANCE STUDY ON VARIOUS LATTICE STRUCTURES PRINTED BY FUSED DEPOSITION MODELING | ADDITIVE MANUFACTURING |
| 24 | 20107034 | SARATHI.S | |||
| 25 | 20107039 | SIVACHANDIRAN.C | |||
| 26 | 20107045 | VETRIVEL.P | |||
| 27 | 8 | 20107033 | SARATHI.C | SEED SOWING MACHINE USING IOT | ARTIFICIAL INTELLIGENCE |
| 28 | 20107042 | SUMITH.S | |||
| 29 | 20107043 | THINESHKUMAR.M | |||
| 30 | 20107044 | VENGATESAN.R | |||
| 31 | 9 | 20107018 | KODIYARASAN.T | DESIGN AND DEVELOPMENT OF HAND GRAIN SUCTION MACHINE | DESIGN & MANUFACTURING |
| 32 | 20107010 | BHARANI SHAKTHI DHARAN.D.S | |||
| 33 | 20107028 | RAJENDRA PRASATH.V | |||
| 34 | 20107040 | SIVASURYA.S | |||
| 35 | 10 | 20107322 | LOGESH.S | INVESTIGATION OF PROCESS PARAMETERS FOR MACHINING OF COMPOSITE MATERIAL USING ELECTRO CHEMICAL MICROMACHINING (ECMM) |
COMPOSITE MATERIAL |
| 36 | 20107333 | RAJESHWARAN. S. M. R | |||
| 37 | 20107336 | SARAVANAN. K. S | |||
| 38 | 11 | 20107312 | HARIPRASATH. V | ANALYSING AND TESTING THE POLYLATIC ACID OF THE PRODUCT BY 3D PRINTING | ADDITIVE MANUFACTURING |
| 39 | 20107320 | KIRUBAKARAN. T | |||
| 40 | 20107335 | RISHIKESAVAN. C. M | |||
| 41 | 20107343 | THANGAMANIKANDAN. R | |||
| 42 | 12 | 20107305 | DHARUN. M. S | INVESTIGATION OF THE PROPERTIES OF COPPER GRAPHENE | COMPOSITE MATERIALS |
| 43 | 20107311 | GUNASEKARAN. M | |||
| 44 | 20107314 | KARTHICK. K. K | |||
| 45 | 20107316 | KARTHIKEYAN. K | |||
| 46 | 13 | 20107308 | GOKUL. V | CNC TURNING CENTRE RETROFITTING AND UPGRADATION | MACHINING |
| 47 | 20107321 | LEOSONU I | |||
| 48 | 20107337 | SUDARMANI. V | |||
| 49 | 20107342 | TAMIZHARASU. S | |||
| 50 | 14 | 20107306 | DINESHKUMAR. S | COMPERATION OF MECHANICAL PROPERTIES OF PLA AND ABS BASED STRUCTURAL PRODUCT BY FUSED DEPOSITION MODELING ADDITIVE MANUFACTURING | ADDITIVE MANUFACTURING |
| 51 | 20107315 | KARTHICK R | |||
| 52 | 20107330 | PREMNATH. L. G | |||
| 53 | 20107331 | RAGUVARAN. P | |||
| 54 | 15 | 20107332 | RAJAMURUGAN. A | DESIGN OF MULTIFUNCTIONAL TABLE SAW MACHINE | DESIGN & MANUFACTURING |
| 55 | 20107341 | TAMILMANI. R | |||
| 56 | 20107345 | YOKESH. S | |||
| 57 | 20107501 | MADHANKUMAR .M | |||
| 58 | 16 | 20107318 | KIRANKUMAR. M | INVESTIGATION OF FRICTION STIR WELDING PERFORMANCE OF AISI 304 STAINLESS STEEL |
WELDING |
| 59 | 20107328 | NISHANTH. R | |||
| 60 | 20107329 | PRAVEENKUMAR. S | |||
| 61 | 17 | 20107307 | GOKUL M | INVESTIGATIONAL ANALYSIS OF STRENGTH ENHANCEMENT ON FRICTION STIR PROCESSED AZ31B MAGNISIUM ALLOY | COMPOSITE MATERIALS |
| 62 | 20107325 | MOHAMMED RIYAS. A | |||
| 63 | 20107334 | RAMBOJITH.V | |||
| 64 | 18 | 20107302 | ASHIF ALI. M | ANALYSIS OF BOILER PARTS AND TUBE FAILURE | THERMAL |
| 65 | 20107309 | GOUSHIK PRABHU | |||
| 66 | 20107326 | MOHAMMED RIYAS. E | |||
| 67 | 19 | 20107303 | BIMAL BAIJU | FABRICATION AND TESTING OF METAL MATRIX COMPOSITES | COMPOSITE MATERIALS |
| 68 | 20107310 | GUNALAN M | |||
| 69 | 20107323 | MANOJKUMAR. V | |||
| 70 | 20107338 | SUDHARSAN. P | |||
| 71 | 20 | 20107502 | NISHANTH.R | DESIGN AND DEVELOPMENT OF AUTOMATION SEWAGE CLEANING | DESIGN & MANUFACTURING |
Academic Year 2022-2023
| BATCH.NO | REG.NO | NAME | PROJECT TITLE | AREA |
| 1 | 19107046 | PIRADEP S | Design and Development of Wastepaper Recycling Machine | Energy |
| 19107050 | PRAVEEN KUMAR B | |||
| 19107052 | RAJAGANAPATHI M | |||
| 19107060 | SAKTHIVEL A | |||
| 2 | 19107047 | PRAKASH D | Design and Development of Agricultural Pesticide Sprayer. | Design & Manufacturing |
| 19107057 | SABARI NATHAN.N | |||
| 19107059 | SACHIN K | |||
| 19107075 | SUBA ANAND G | |||
| 3 | 19107048 | PRAKASH K | Design and Development of IoT operated on Cono Weeder. | Design & Manufacturing |
| 19107049 | PRAVEEN J | |||
| 19107056 | RANJITHKUMAR S | |||
| 19107072 | SIVA GURU NATHAN C | |||
| 4 | 19107051 | PRAVEENRAJ V | Analysis of Machinablity study of Al metal matrix composite through electocheemical micro machining. | Composite |
| 19107053 | RAJAPANDIAN S | |||
| 19107066 | SATHEESH S | |||
| 19107067 | SATHISHKUMAR R | |||
| 5 | 19107058 | SABARINATHAN G | Analysis of boiler tube failure in 210MW Steam boiler. | Analysis |
| 19107064 | SARAN M | |||
| 19107074 | SRIDHARPRASAD R K | |||
| 19107076 | SUBASH U | |||
| 6 | 19107055 | RAMASAMY K | Investigation of Sugancane husk and banana stem composite. | Composite |
| 19107068 | SEENUVASAN K | |||
| 19107069 | SELVAPRABBU N | |||
| 19107071 | SIVA CHANDRU KANNAN C | |||
| 7 | 19107062 | SANJAY S | Design,Analysis and Development of Gearless multipully bicycle with increased speed. | Design & Manufacturing |
| 19107065 | SARAVANAN N | |||
| 19107070 | SHAM K | |||
| 19107073 | SIVALINGAM S | |||
| 8 | 19107077 | SUJIN DHAS R | Analysis of Sugancane husk and banana stem composite. | Composite |
| 19107081 | VEL PRABHAKARAN C | |||
| 19107325 | UTHAYAVAANAN V G | |||
| 19107326 | VENU ARAVIND M | |||
| 9 | 19107079 | SUYAMPRAKASHAM M | Design and Development of Automatic Pick and Place Robot. | Production-Roboticcs |
| 19107085 | VIGNESH G | |||
| 19107086 | VIGNESH K | |||
| 19107320 | RAJASEKARAN S | |||
| 10 | 19107080 | THIRUSENTHILNATHAN D | Design,Analysis and Development of Four Wheel Drive Electric vehicle. | E-Vehicle |
| 19107316 | PRASANTH M | |||
| 19107318 | PREMNATH S | |||
| 19107323 | SRIRAM M | |||
| 11 | 19107083 | VENKATESH S | Design and Development of Electric Vehicle with Automatic Speed Control. | E-Vehicle |
| 19107324 | SURIYAPRAKASH S B | |||
| 19107327 | VIGNESH M | |||
| 19107328 | ANAND M | |||
| 12 | 19107084 | VENKATESWARA G | Design and Development of Automatic Wheel chair cum Bed. | Design & Manufacturing |
| 19107310 | KARTHICK S | |||
| 19107313 | NANTHAKUNAR P | |||
| 19107321 | SRINIVASAN A | |||
| 13 | 19107087 | VIJAYPRIYAN M | Experimental Investigation in Friction Welding. | Welding |
| 19107088 | VINOTH N | |||
| 19107311 | KUMARAGIRI A | |||
| 19107322 | SRIPUGAL P | |||
| 14 | 19107078 | SUNIL A | Design and Analysis of Torque Controlled Wheel chair using Hall effect Sensor. | Design & Manufacturing |
| 19107082 | VENKATESAN K | |||
| 19107089 | VISHNURAM A | |||
| 15 | 19107046 | PIRADEP S | Design and Development of Wastepaper Recycling Machine | Energy |
| 19107050 | PRAVEEN KUMAR B | |||
| 19107052 | RAJAGANAPATHI M | |||
| 19107060 | SAKTHIVEL A | |||
| 16 | 19107047 | PRAKASH D | Design and Development of Agricultural Pesticide Sprayer. | Design & Manufacturing |
| 19107057 | SABARI NATHAN.N | |||
| 19107059 | SACHIN K | |||
| 19107075 | SUBA ANAND G | |||
| 17 | 19107048 | PRAKASH K | Design and Development of IoT operated on Cono Weeder. | Design & Manufacturing |
| 19107049 | PRAVEEN J | |||
| 19107056 | RANJITHKUMAR S | |||
| 19107072 | SIVA GURU NATHAN C | |||
| 18 | 19107051 | PRAVEENRAJ V | Analysis of Machinablity study of Al metal matrix composite through electocheemical micro machining. | Composite |
| 19107053 | RAJAPANDIAN S | |||
| 19107066 | SATHEESH S | |||
| 19107067 | SATHISHKUMAR R | |||
| 19 | 19107058 | SABARINATHAN G | Analysis of boiler tube failure in 210MW Steam boiler. | Analysis |
| 19107064 | SARAN M | |||
| 19107074 | SRIDHARPRASAD R K | |||
| 19107076 | SUBASH U | |||
| 20 | 19107055 | RAMASAMY K | Investigation of Sugancane husk and banana stem composite. | Composite |
| 19107068 | SEENUVASAN K | |||
| 19107069 | SELVAPRABBU N | |||
| 19107071 | SIVA CHANDRU KANNAN C | |||
| 21 | 19107062 | SANJAY S | Design,Analysis and Development of Gearless multipully bicycle with increased speed. | Design & Manufacturing |
| 19107065 | SARAVANAN N | |||
| 19107070 | SHAM K | |||
| 19107073 | SIVALINGAM S | |||
| 22 | 19107077 | SUJIN DHAS R | Analysis of Sugancane husk and banana stem composite. | Composite |
| 19107081 | VEL PRABHAKARAN C | |||
| 19107325 | UTHAYAVAANAN V G | |||
| 19107326 | VENU ARAVIND M | |||
| 23 | 19107079 | SUYAMPRAKASHAM M | Design and Development of Automatic Pick and Place Robot. | Production-Roboticcs |
| 19107085 | VIGNESH G | |||
| 19107086 | VIGNESH K | |||
| 19107320 | RAJASEKARAN S | |||
| 24 | 19107080 | THIRUSENTHILNATHAN D | Design,Analysis and Development of Four Wheel Drive Electric vehicle. | E-Vehicle |
| 19107316 | PRASANTH M | |||
| 19107318 | PREMNATH S | |||
| 19107323 | SRIRAM M | |||
| 25 | 19107083 | VENKATESH S | Design and Development of Electric Vehicle with Automatic Speed Control. | E-Vehicle |
| 19107324 | SURIYAPRAKASH S B | |||
| 19107327 | VIGNESH M | |||
| 19107328 | ANAND M | |||
| 26 | 19107084 | VENKATESWARA G | Design and Development of Automatic Wheel chair cum Bed. | Design & Manufacturing |
| 19107310 | KARTHICK S | |||
| 19107313 | NANTHAKUNAR P | |||
| 19107321 | SRINIVASAN A | |||
| 27 | 19107087 | VIJAYPRIYAN M | Experimental Investigation in Friction Welding. | Welding |
| 19107088 | VINOTH N | |||
| 19107311 | KUMARAGIRI A | |||
| 19107322 | SRIPUGAL P | |||
| 28 | 19107078 | SUNIL A | Design and Analysis of Torque Controlled Wheel chair using Hall effect Sensor. | Design & Manufacturing |
| 19107082 | VENKATESAN K | |||
| 19107089 | VISHNURAM A |
Academic Year 2021-2022
| Batch Number | Register Number | Name of the Students | Project Title | Area |
| 1 | 18107301 | Ajay Aravindan.A | Material Properties, Synthesis And Characterization Of Aluminium Hybrid Metal Matrix Composites | Composite |
| 18107303 | Anbarasu.R | |||
| 18107312 | Gokul.G | |||
| 18107032 | Logendran.R | |||
| 2 | 18107014 | Dinesh Kumar V | Investigation On Extraction Of Biodiesel From Waste Cooking Oil | Energy(Alternative fuels) |
| 18107314 | Hariprasanth K | |||
| 18107026 | Jeevanantham.R | |||
| 18107035 | Manoj Kumar S | |||
| 3 | 18107010 | Dharani Vendhan. V | Corrosion Behaviour Of Aluminum Hybrid Metal Matrix Composite | Composite |
| 18107027 | Joshvin . C | |||
| 18107028 | Karthick. C | |||
| 4 | 18107042 | Premkumar.M | Optimization Of Cutting Parameters Of Aluminum 7049 In End Milling Under MQL Condition | Composite |
| 18107304 | Aravindh.R | |||
| 18107311 | Dinesh.M | |||
| 18107319 | Kavin.P | |||
| 5 | 18107306 | S.Balaji | Investigation Of Corrosion Properties Of Sic And Al2O3 Reinforced Aluminium Metal Matrix Composites | Composite |
| 18107315 | R.Janarthanan | |||
| 18107316 | B.Jeeva | |||
| 18107317 | S.Karan Kumar | |||
| 6 | 18107011 | M.Dharshini | Investigation On Si Engine Characteristics Fuelled By Gasoline, Ethanol And Methanol Blends Dopped With Nano Additive(AL2O3) | Energy(Alternative fuels) |
| 18107022 | K.Gowthaman | |||
| 18107031 | S.Kombaiah Pandian | |||
| 18107033 | P.Maheswaran | |||
| 7 | 18107016 | Dinesh R | Experimental Analysis Of Spur Gear Reinforced With Natural Fibers And Polyester Resin | Composite |
| 18107017 | Elango P | |||
| 18107018 | Francis B | |||
| 18107023 | Harish Kumar K | |||
| 8 | 18107012 | K.Dharumaraj | Experimental Investigation On DI CI Engine Characteristic Fueled With Tyre Pyrolysis Oil Diesel Blends | Energy(Alternative fuels) |
| 18107025 | P.Jayaprakash | |||
| 18107029 | D.Kesavel | |||
| 18107040 | S.Prakash Raj | |||
| 9 | 18107034 | M.Manikandan | Smart Blindstick For Visually Impaired Persons | Design |
| 18107038 | J.Navaneethan | |||
| 18107039 | S.Nivas | |||
| 18107041 | P.Prem | |||
| 10 | 18107001 | Abdul Razack M | Electrochemical Micromachining Of A Composite | Machining |
| 18107002 | Abdullah K | |||
| 18107030 | Kishore M | |||
| 11 | 18107008 | Danush Maithairiya R | Experimental Investigation Of 8011 Reinforcement With Metal Matrix Composite | Composite |
| 18107009 | Dhanasiva S | |||
| 18107308 | Deepack R A | |||
| 12 | 18107043 | PUNITH KUMAR M | Fabrication of Pnuematic Grinding Machine | Manufacturing |
| 18107048 | ROKITH C | |||
| 18107050 | SANJAI BALAJI S | |||
| 18107067 | SUNDAR.C | |||
| 13 | 18107044 | RAGHULGANDHI A | Fabrication of IoT based multi agricultural machine | Manufacturing |
| 18107045 | RAGUPATHI RAJ S | |||
| 18107055 | SASIKUMAR T | |||
| 18107060 | SILAMBARASAN P | |||
| 14 | 18107047 | RISHIKANTHA R | Fabrication of solar cycle | Renewable energy |
| 18107051 | SANJAY E | |||
| 18107054 | SASIKUMAR S | |||
| 18107058 | SELVA AJAY K | |||
| 15 | 18107053 | SANJEEV R | Investigation of wear resistance on ceramic coating for Aluminum alloy | Manufacturing |
| 18107057 | SATHEESH S | |||
| 18107059 | SENBAGAPRIYAN A | |||
| 18107061 | SIRANGEEVI.S | |||
| 16 | 18107077 | VISHWESH MANISH.M.R.S | Generating electicituy by foot path floor tiles | Renewable energy |
| 18107080 | RAKUL.R | |||
| 18107049 | M.SAMYDURAI | |||
| 18107056 | SATHEESH KUMAR | |||
| 17 | 18107062 | SIVA.A | Electricity generation by Hot gases | Renewable energy |
| 18107063 | SIVAKUMAR.E | |||
| 18107066 | SUBASH.S | |||
| 18107068 | SURENDAR.G | |||
| 18 | 18107069 | THAMARAISELVAN.S | Design and anlaysis of Aqua Silencer | Design & Manufacturing |
| 18107070 | THANGARAJ. S | |||
| 18107071 | THIRUMALAI.S | |||
| 18107072 | VEERACHANDRU.K | |||
| 19 | 18107073 | VENGATESH.S | Design and analysis highway wind power generation using wind turbine | Renewable energy |
| 18107330 | SANTHOSHKUMAR.S | |||
| 18107325 | PRATHISH.G.A | |||
| 18107328 | RAJASELVAM.S | |||
| 20 | 18107075 | VIKRAM.J | Identifying and trouble shooting of vibration problem in rotating equipments using FFT software | Design |
| 18107076 | VINITHKUMAR.B | |||
| 18107078 | YOGESHWARAN.M | |||
| 18107332 | SUNDHARRAJAN.N | |||
| 21 | 18107331 | SUKUMAR | Optimization of cutting parameters of EN-31 Alloy steel in end milling operation | Production |
| 18107337 | VENKATESHWARAN.D | |||
| 18107321 | MOHANRAJ | |||
| 18107326 | PREMKUMAR | |||
| 22 | 18107323 | NITHISHKUMAR.N | Two wheeler speed limit control system | Design |
| 18107336 | VEERARASAN.N | |||
| 18107333 | SURENDAR.K | |||
| 18107335 | ULAGANATHAN.S | |||
| 23 | 18107320 | MOHANASANKAR.R | Experimental investigation of fiber material composite in leaf spring | Composite |
| 18107322 | MOHANRAJ.S | |||
| 18107329 | SANTHOSHKUMAR.G | |||
| 18107334 | TAMILRASAN.K | |||
| 24 | 18107327 | PUGAZHENDIRAN.M | Vortex tube refrigeration system | Refrigeration |
| 18107501 | SIVAMANI.A | |||
| 18107502 | VENKATRAMAN.D | |||
Academic Year 2020-2021
| S.NO | Name of the students | Title of the project | Area |
| 1 | Sandhiya.D | Analysis Of Mechanical Properties Of Aluminium Hybrid Composite | Composite |
| Sakthipriyan.S | |||
| Samraj Hariharan.A | |||
| Ranjithmohan.R | |||
| 2 | Rahul Krishnan.R | Design And Analysis Of Fire Extinguisher Robot | Design |
| Sajith.I | |||
| Santhosh.P | |||
| Shankar Maha Devan.E | |||
| 3 | Ponkumar.M | Vortex Tube Refrigeration System | Thermal |
| Ragul.M | |||
| Sakthivel.K | |||
| Sankaranarayanan.K | |||
| 4 | Prethiyan.P | Design And Analysis Of Motorized Hydraulic Jack | Design |
| Pradeep.R | |||
| Senthilraja.M | |||
| 5 | Prakash.G | Investigation Of Aluminium Metal Matrix Composite Prepared By Squeeze Casting Method | Composite |
| Prakash.R | |||
| Santhosh.M | |||
| Sabari Raja.S | |||
| 6 | Pravin Kumar.K | Design And Analysis Of Material Handling Machine For Light Weight Application | Design |
| Prithvi Raj.R | |||
| Ragunath.R | |||
| Saran.S | |||
| 7 | Amirthavarshini.M | Process Parameter Optimization Of WEDM Of Maraging Steel | Optimization |
| Nisha Nandhini.A | |||
| Selvam.R | |||
| 8 | Praveen.G | Air Brake System using Exhaust Gas | Thermal |
| Premkumar.A | |||
| Reegan.R | |||
| Sankar.S | |||
| 9 | Suthesh.S | Automatic Pneumatic Hammering System | Design |
| Vignesh.S | |||
| Vijay.J | |||
| Shyam Sundar | |||
| 10 | Sheik Abdullah.H | Optimization Of Machining Parameters Of Face Milling Operation | Optimization |
| Sonit Jacob.J | |||
| Subash.B | |||
| Vijayaragavan.M | |||
| 11 | Vengatesh.R | Hydraulic Metal Bending Machine | Design |
| Suman Raj.P | |||
| Vishesh | |||
| Karthick K | |||
| 12 | Suresh Kumar.M | Design And Analysis Of Leaf Spring Using Fiber Composites | Design |
| Yogeshwaran.K | |||
| Tamil Selvan.S | |||
| Vinayagamoorthy S | |||
| 13 | Suresh Kumar.S.S | Simulation And Analysis Of Tilt Rotor Unmanned Aerial Vehicle | Analysis |
| Vignesh.K | |||
| 14 | Tamilselvan.S | Design And Analysis Of Intelligent Braking System For LCV | Design |
| Thinagaran.E | |||
| Thirumoorthi.N | |||
| Yogeshwaran. R | |||
| 15 | Vignesh.J | Design And Analysis Of Solar Power Based Reciprocating Water Pump | Design |
| Vignesh.N | |||
| Vallarasu.R | |||
| Vinith Kumar.R | |||
| 16 | Sheik Mohamed | Thermal Analysis Of Piston With Different Materials | Thermal |
| Sibi.T.K | |||
| Mohana Krishna.S | |||
| Velan.B | |||
| 17 | Ajay .P | Fabrication of Automatic and Eco Friendly Lawn mover | Design |
| Ajay Kannan .A | |||
| Dhilip .M | |||
| Bharath .P | |||
| 18 | Beer Mohamed .M | Tree Climbing Machine | Design |
| Anbu .M | |||
| Aswin .M | |||
| Dhivakar .K | |||
| 19 | Ayyanar .B | Fabrication and Machinability of Aluminium Metal Matrix Composite using Electrochemical Micromachining | Materials and Machining |
| Deepan ,S | |||
| Arunkumar .K | |||
| Dhananjayan .H | |||
| 20 | Dhilip .M | Performance analysis of alternative fuel in DI Diesel Engine | Alternative fuel |
| Arun .R | |||
| Dhaneeshdharan .S | |||
| Ciddarth .S | |||
| 21 | Hemanth Kumar .R | Performance Optimization of Electrochemical Micromachining | Optimization |
| Ganeshkumar .S | |||
| Dhina .C | |||
| Kabilan .K | |||
| 22 | Gokul .M | Fabrication of Pedal Powered Washing Machine | Design |
| Gokul Dravid .S | |||
| Harikaran .M | |||
| Hari Prasath .K | |||
| 23 | Hariharashankar .A.C | Design and Fabrication of Motorized Hover Board | Design |
| Jeeva .L.G | |||
| Gopinath .S | |||
| Elumalai .M | |||
| 24 | Giridharan .S | Development of Composite containing Recycled Plastic Reinforced with Sugarcane Bagasse, Fibre Glass and Coconut Coir for Mechanical Testing | Composite Materials |
| Hariharan .B | |||
| Hariharan .B | |||
| Harish .P | |||
| 25 | Karthikeyan .P | Design and Development of Industrial Suction Cleaner | Design |
| Praveen Kumar | |||
| Madhavaraj .R | |||
| Siddarth .N | |||
| 26 | Pradheeph Kumar | Intelligent reverse breaking system using IR sensor | Automation |
| Omsakthi .E | |||
| Manikandan .R | |||
| Naveen Kumar .R | |||
| 27 | Balaji .R.S | Hybrid Power Supply System Based on Modular Multilevel Converter (Solar and Wind Energy) | Renewable Energy |
| Krishnakumar .G | |||
| Kaviarasu .S | |||
| Nandha Kumar .S | |||
| 28 | Mahesh .C | Gravity Light using Perpetual Rotary Motion | Design |
| Manikandan .G | |||
| Madhavan .S | |||
| Karthikeyan .J | |||
| 29 | Kalaiselvan .S | Investigation of Wear Resistance of IC Engine Components: Piston and Cylinder Valve | Optimization |
| Naveen Kumar .M.C | |||
| Loganathan .K | |||
| Mohanraj .R | |||
| 30 | Naveen .R | Multi-faceted Hydraulic Technology with Gripper and Tool | Robotics |
| Omprakash .K | |||
| Nidhesh Kumar .J.B | |||
| Manivannan .V | |||
| 31 | Aakash .S | Fabrication and Machinability of Aluminium Metal Matrix Composite using Carbon Fiber | Metal Matrix Composites |
| Mohamed Basith.M | |||
| Gowtham .C | |||
| Vasanthakumar.P | |||
| 32 | Parthasarathy .M | Analysis of Mechanical Properties of Al8011-B4C Composite | Metal Matrix Composites |
| Karthikeyan .A | |||
| Parthiban .P | |||
| Naveen .S |
Academic Year 2019-2020
| S.No | Name of the students | Title of the project | Area |
| 1 | Abdul Rahim A | Heat Transfer Enhancement in Double Pipe Heat Exchanger with Insert | Thermal |
| Adite Mathew | |||
| Anandh A | |||
| Arun Gokul M | |||
| 2 | Ajith Kumar P | Automatic Mini Lawn Mower | Design |
| Ashok R | |||
| Athiyaman M | |||
| 3 | Ajithkumar R | Optimization of Process Parameters of Micro-EDM of Monel 400 Alloy | Machining |
| Anbarasan R | |||
| Aravindhan G | |||
| Arunkumar A | |||
| 4 | Ajithkumar K | Fabrication And Mechanical Behavior Of Magnesium –Fly Ash Composites | Composites |
| Anand K | |||
| Arun Prasath B | |||
| Arun M | |||
| 5 | Arishbabu P | Investigation of control parameters in Electro Chemical Micro Machining for Bronze |
Machining |
| Arulmani K | |||
| Arunagiri R | |||
| 6 | Abhishek.M.R | Fabrication and Mechanical Testing of Composite Helmet | Composites |
| Amar Kumar.N | |||
| Arun.S | |||
| Arun Raj.A | |||
| 7 | Arun Patha Muthu.P | Parametric Optimization of Single Cylinder Diesel Engine Fueled with Waste Tyre Oil Diesel Blend for Brake Thermal Efficiency And Emissions using Taguchi Method | Thermal |
| Arun.N | |||
| Balakrishnan.M | |||
| 8 | Dhivakar P | Easy wastage lifting vehicle | Design |
| Gokulraj D | |||
| Gokulraj M | |||
| Gokulakrishnan.P | |||
| 9 | Deepak Kumar .R | Mechanical behaviour of Aluminium based Metal Matrix composite reinforced with Ni and AL2O3 |
Composites |
| Dhanapal .M | |||
| Gokul Raj .T | |||
| Gopinath .K | |||
| 10 | Deenadayala Boopathi D | Tribological behaviour of Internal Plasma Sprayed AL6061 based Ceramic Coating on engine cylinder under lubricated conditions | Composites |
| Hariharan S | |||
| Kandasamy M | |||
| 11 | Esaiarasu P | Emergency Rescue Vehicle | Design |
| Deepanraj P | |||
| Dhayanadhan S | |||
| Dharunkumak C | |||
| 12 | Dayanidhi O | Experimental investigation of Dissimilar Weld Joints between Magnesium (MgAZ91) and Aluminium alloy (AA 5083) by using TIG welding process |
Welding |
| Devanathan N | |||
| Dinesh Kumar A | |||
| Dinesh K | |||
| 13 | Dhanaseelan M | Estimation of Electro Chemical Micro Machining process for Brass (copper alloy) | Machining |
| Dhevesh V.S | |||
| Dhinesh R | |||
| Ganguly C | |||
| 14 | Elavarasan M | Performance study of AWJM for Drilling Micro Holes on Aluminium composite | Composites |
| Gunaseelan J | |||
| 15 | Gomadurai.V | Investigation of Mechanical properties of Aluminium and Flyash Metal Matrix composite for Engineering Application | Composites |
| Gowtham.A | |||
| Hari Krishna.S.I | |||
| Hari Prashanth.S | |||
| 16 | Govindharaj.P | Design and fabrication of Waste Seperator | Design |
| Gowrishankar.R | |||
| Hemathkumar.A | |||
| Joanofarc.P | |||
| 17 | Hariharan.S | Performance Test of the Petrol Engine by using Alternative Fuels | Thermal |
| Harish.P | |||
| Hariharan.R | |||
| Jeevithkumar.A | |||
| 18 | Kalaiselvan.R | Solar Powered Smart Trolley for Super Market | Design |
| Jaikishor.M | |||
| Jeeva.As | |||
| Jeeva.R | |||
| 19 | Gunaseelan.K | Investigation of Mechanical Properties of Aluminium Metal Matrix Composites | Composites |
| Ilayasuriyan.U.S | |||
| Jeya Singam.M | |||
| Karthick.P | |||
| 20 | Jaganath.G | Investigation of Flexural and Low Velocity Impact Behaviour of Kevlar Honey Comb Reinforced Phenolic Composites | Composites |
| Jeevanantham.S | |||
| Karthik.G | |||
| Kannan.M | |||
| 21 | Manikandan.B | Machining of Aluminium Composite by EDM Process | Composites |
| Kumaresan. S | |||
| Meganathan.R | |||
| Ragul.R | |||
| 22 | Kumaran.R | Performance Test on Alternative Fuels Used in DI Diesel Engine | Thermal |
| Krishnan.K | |||
| Keerthick Raj.V | |||
| Levis Raj.A | |||
| 23 | Kaviarasu.S.T | Room Air Conditioning Using Heat Pipe | Thermal |
| Keerthivasan.M | |||
| Mithun Chakhravarthi.K.S | |||
| Mohamed Asif.S | |||
| 24 | Mithran.M | Fabrication of Handicapped Steering Cycle | Design |
| Mokana Prasad.A | |||
| Mohan Raj.B | |||
| Mohammed Arifali.D | |||
| 25 | Mohanraj.V | Characterization of Drilling Holes on Aluminium Composite (7050 Al + Al2O3 + SiC) by Using Abrasive Water Jet Machining | Composites |
| Marimuthu.G | |||
| Mathanraj.M | |||
| Karthikeyan. C | |||
| 26 | Kesavaselvan.A | Fabrication of Agricultural Multipurpose Machine | Design |
| Logeshkumar.E | |||
| Mohamed Afrhid.A | |||
| Manikandan. K | |||
| 27
|
Prem Kumar.G | Basalt Fibre Management in the Production of Highly Effective Phenolic Composite in Thermal Insulating Application | Thermal |
| Mouli.J | |||
| Nithish Kumar.C | |||
| Parthasarathy.S | |||
| 28
|
Praveen Kumar.T | Mechanical and Morphogical Behaviour of S-Glass Reinforced Polmer Matrix Composites for Defense Application | Composites |
| Paul Raj.B | |||
| Pavun Raj.V | |||
| Ragul.R | |||
| 29
|
Rajaguru.J | Fabrication and Analysis of Reinforcement Effect of Aluminium 6026 with Silicon Carbide | Composites |
| Naveen Kumar.S | |||
| Nambeeshwaran.N | |||
| Muhil Prasath.S | |||
| 30
|
Raja.P | Fabrication and Characterization of Aluminium Metal Matrix Composites Reinforced with Cerium Oxide | Design |
| Pradeep.K | |||
| Nilesh Kumar.T | |||
| Muthuram.M | |||
| 31
|
Praveen Kumar.G | Fabrication and Analysis of Human Prosthetic Teeth by 3d Printing for Medical Assistance | Design |
| Pavithran.S | |||
| Naveen Narasimha Raj.N | |||
| Panneerselvam.P | |||
| 32
|
Naveen Kumar.M.S | Fabrication and Characterization of Aluminium Metal Matrix Composites Reinforced with GGBS | Design |
| Navin.J | |||
| Navaneethan.K | |||
| Mukesh.M | |||
| 33
|
Samshad Shahzada | Fabrication of Glass Reinforced Phenolic Composites for E Vehicle Battery Cartons | Composites |
| Samsudeen.A | |||
| Sai Kannan.C | |||
| Sanjay.V | |||
| 34
|
Sankar Ganesh.R | Design and Optimization of Artificial Ankle Joint by using Finite Element Method | Design |
| Rajesh.B | |||
| Sakthivel.S | |||
| Satheesh Kumar.K | |||
| 35
|
Santhosh.M | Power Generation System by using Waste Exhaust Heat | Design |
| Prakash.K | |||
| Sasinthar.V | |||
| Rajiv.S | |||
| 36
|
Vijay.P | Design and fabrication of solar assisted hybrid cooling and heating system by using gate valve | Design |
| Vimal.M | |||
| Abiram.S | |||
| Sanjeevi Kumar.R | |||
| 37
|
Samuvel.V | Fabrication of joining two dissimilar materials by using Friction Stir Processing | Design |
| Mytheeshwaran.T | |||
| Prem Kumar.K | |||
| Srinivasan.A | |||
| 38
|
Ramesh Babu.N | Experimental Investigation of Process Parameters in Electrochemical Micro Machining for Aluminium Metal Matrix Composite by Using Response Surface Methodology | Machining |
| Sankar.G | |||
| Ashik Mohamed.R | |||
| 39
|
Ramesh.N | Experimental investigation of Electrochemical Micro Machining process parameters by using different Tool Material | Machining |
| Rajesh.M | |||
| Santhosh.G | |||
| 40 | Selvarasu.E | Frictional evaluation of Plasma Sprayed Coating applied on the Cylinder liner and Piston Crown in Diesel engine | Thermal |
| Srikanth.S | |||
| Stalin .P | |||
| Tamil Selvan.V | |||
| 41 | Sivakumar.M | Design and analysis of 3-way Pneumatic Dumping Trailer | Design |
| Soma Sundar.R | |||
| Sudhakar.V | |||
| Suresh.R(30.06.1998) | |||
| 42 | Srinivasan.K | Analysis of Tribological factor on Dry Sliding Wear behavior of Plasma Spray Ceramic coating by Taguchi method | Design |
| Sundarapandi.B | |||
| Suresh.R(17.01.1999) | |||
| Syed Ghouse Peeran.S | |||
| 43 | Sridhar.E | Experimental and theoritical investigation of CI engine characteristics fuelled with tyre oil and diesel blends | Thermal |
| Sridharan.R | |||
| Subasri.K | |||
| 44 | Srinivasan.A | Design and implementation of movable pick and place robot | Design |
| Subbulakshmi.K | |||
| Sharath Deepak.P | |||
| Thamizh Selvam.D | |||
| 45 | Keerthana.K | Design and analysis of Parallel Car Parking using fifth wheel | Design |
| Siva.R | |||
| Vasanth.S | |||
| Sudharsan.D | |||
| 46 | Surya Prakash.M | Analysis of fiber composite Leaf spring by using E-Glass/Epoxy | Composites |
| Sheik Alavudeen.A | |||
| Sukkur.A | |||
| 47 | Vinoth.J | Design and analysis of manual Roller Bending Machine | Design |
| Vishnu.R | |||
| Vijay.P | |||
| Yuvaram Shankar.K | |||
| 48 | Venkatesh.N | Analysis of Mechanical properties for the Aluminium based composite | Composites |
| Vijaysharma.S | |||
| Yasvanth Kumar.R | |||
| Sugavanan.U | |||
| 49 | Venkatachalam.K | Design and implementation of six legged walking robot | Design |
| Venkatesh.G | |||
| Vigneshwaran.B | |||
| Vigneshwaran.S | |||
| 50 | Vasantha Kumar.K | Design and Analysis of Automatic Electro Magnetic clutch |
Design |
| Vignesh.A | |||
| Vijay.S | |||
| 51 | Vigneshwaran.S | Analysis of mechanical behaviour of coconut coir and banana jute fibre | Composites |
| Vijay.P | |||
| Vijaya Prasath.Vm | |||
| Vishvananth.K | |||
| 52 | Vijayakumar.R | Multi operation vehicle for Agriculture application | Design |
| Yogeshwaran.M | |||
| Sivabalan.C | |||
| Ranjithkumar.M |
Academic Year 2018-2019
| S.No | Name of the students | Title of the project | Area |
| 1 | N.Anantha Pradeep | Investigation on effect of Hard Coating on Mild Steel for High Strength Mechanical Application | Design |
| M.Baskaran | |||
| K.Akash | |||
| P.Arunkumar | |||
| 2 | V.Arunkumar | Performance and Emission Characteristics of Multi Fuels in SI Engine | Thermal |
| K.Arunkumar | |||
| S.Akash | |||
| M.Arun | |||
| 3 | J.Ahamed Shreif | Investigation of Control Parameters in Electrochemical Micro Machining for Aluminium Composite Metal Materials | Composites |
| M.Aravind | |||
| S.Arunkumar | |||
| S.A.Arunkumar | |||
| 4 | N.Ajithkumar | Automatic Pneumatic Braking System | Design |
| M.Ajith | |||
| P.S.Ashwanth | |||
| R.Balaji | |||
| 5 | A.Ajithrahman | Experimental Investigation and Performance of Diesel Engine by The Oil Derived From Waste Plastics | Thermal |
| R.Ajith | |||
| G.Alagu Pandiyan | |||
| S.Balamurugan | |||
| 6 | M.M.Aswin | Effect of Hard Coating on Copper Plate for Higher Strength Mechanical Application. | Design |
| D.Anto Ajith | |||
| S.Arivazhagan | |||
| B.Arun Kumar | |||
| 7 | J.Ajith | Vacuum Operated Multipurpose Wall Climbing Robot | Design |
| N.Amithraj | |||
| V.Anand | |||
| V.Anishraj | |||
| 8 | G.Govindaraj | Hybrid Air Engine | Design |
| N.Dellish Kumar | |||
| R.Dineshbabu | |||
| S.Jaichandar | |||
| 9 | R.Bharathkumar | Selection of Die and Die Punch Material using MCDM Technique | Machining |
| P.R.Gokulnath | |||
| R.Bhuvaneswaran | |||
| B.Hariharan | |||
| 10 | S.Darshan | Investigation of Parameters Influencing Wear Resistance of Alumina, Zirconia and Titania Composite Coating on Ai6061 Substrate | Composites |
| G.Deepak | |||
| R.Gopinath | |||
| G.Gurumoorthy | |||
| 11 | G.Dinesh | Investigation on Mechanical Properties of Al Metal Matrix Composites | Composites |
| S,Dinesh | |||
| S.Elayaraja | |||
| R.Gokulavanan | |||
| 12 | D.Gokulakrishnan | Improving The Efficiency of An IC Engine by using Oxy-Hydrogen Fuel | Thermal |
| S.Anandhaprakash | |||
| S.Boopesh | |||
| P.Jayaprakash | |||
| 13 | J.Dhamodiran | Effect of Hard Coating on Copper for High Strength Mechanical Application | Design |
| C.Dineshkumar | |||
| P.Gokul | |||
| A.Gopianandh | |||
| 14 | P.T.Dineshkumar | Power Generation using Micro Hydro Power plant | Design |
| I.Diwanriyas | |||
| C.Gopinath | |||
| 15 | J.Jeevitha | Experimental Investigation of Tyre Pyrolysis Oil as an Alternative Fuel for Diesel Engine | Thermal |
| M.Harishkumar | |||
| T.Karthick | |||
| T.Manibharathi | |||
| 16 | G.Manikandan | Generation of Micro Holes Through Electro Chemical Micro Machining on a Composite Specimen | Composites |
| P.Manikandan | |||
| T.Manikandan | |||
| 17 | B.Karthik | Fabrication and Analysis of Composite Material in Spur Gear | Composites |
| R.Krishna Kumar | |||
| S.Kumar | |||
| P.Lakshmanan | |||
| 18 | M.Indiran | Conversion of Kinetic Energy in To Electrical Energy by Regenerative Braking System | Automobile |
| K.Jeevanandam | |||
| M.Kumar | |||
| R.Manikandan | |||
| 19 | S.Karthick | Optimisation of Process Parameter of Aluminium Metal Matrix Composite through Electro Chemical Micromaching using Taguchi Method | Machining |
| S.Karthikraja | |||
| T.Kiran | |||
| K.Kishore Bala | |||
| 20 | M.Hariharan | Performance of Conical Heat Exchanger using Water Nanofluids | Thermal |
| A.Karthick | |||
| R.Kishore | |||
| 21 | J.Jenish | Design and Development of Highway Wind Turbine | Design |
| S.Karan | |||
| P.Kumaresan | |||
| L.Mani Shankar | |||
| 22 | S.Jayavishnu | Thermal Analysis of Piston Crown by using Heat Insulation Coating Method | Thermal |
| P.Karthick | |||
| M.Karthik | |||
| S.Lokeshkanna | |||
| 23 | S.Mohammed Rafi | Experimental Investigation of Bio-Diesel From Cooking Oil as an Alternative Fuel for Diesel | Thermal |
| S.Mohan Kumar | |||
| M.Manojkumar | |||
| K.Muthusethupathi | |||
| 24 | R.Manojkumar | Experimental Investigation of 5 Way Catalytic Converter | Automobile |
| M.Mohan | |||
| P.Nandheeshwaran | |||
| M.Ravikumar | |||
| 25 | N.Mohanraj | Experimental Investigation of Aluminium Silicon Carbide Combosite | Composites |
| T.Murugan | |||
| C.Muruganandan | |||
| S.Gunasekaran | |||
| 26 | S.Mohamed Riyaz | Fabrication of Solar Power Groundnut Thresher | Thermal |
| H.Mohamed Tharik | |||
| M.Munirurrila | |||
| M.Naveen | |||
| 27 | R.Manojkumar | Fabrication of Two Stroke Electromagnetic Engine | Thermal |
| S.Partha Prasath | |||
| S.Pradeep | |||
| S.Dinesh | |||
| 28 | K.Mangalasundram | Mechanical Characterization of Basalt Fiber for Commercial Application | Material Science |
| A.Manoj Kumar | |||
| R.Mohan Ram | |||
| 29 | S.Naveen | Fabrication of Automatic Emergency Braking System in Four Wheelers | Design |
| S.Naveen Kumar | |||
| T.Mathi | |||
| N.Mohammed Riyaz | |||
| 30 | S.Hari Prasath | Design and Fabrication of Universal Flexible Drilling Machine | Design |
| H.Hassan Mohamed | |||
| M.Karthick | |||
| F.Mustak Ali Khan | |||
| 31 | Periyasamy.S | Fabrication and Charaterisation of Kevelar/Basalt Reinforced Hybrid Composite | Design |
| Poovarasan.K | |||
| Pradeep.A | |||
| Premkumar.T | |||
| 32 | Prithivi Rajan.K | Experimental Investigation of Noice Reduction on Automotive Muffler | Design |
| Prem.S | |||
| Rajeshkumar.K | |||
| 33 | Prem Kumar.G | Experimental Investigation of Aluminium Metal Matrix Composite Through Electrochemical Micromachining | Composites |
| Nirmal.S.K | |||
| Praveenkumar.P | |||
| Ragu Ram.K | |||
| 34 | Pasupathi.R | Automated Compact Jack for Four Wheeler Lifting Operation With Spur Gear Incorporated Pump To Increase The Efficiency | Automobile |
| Poovarasan.P | |||
| Pradeesh.J | |||
| Pradeep.T | |||
| 35 | Prabakar.G | Power Production From Exhaust Gas of an Engine | Thermal |
| Premkumar.S | |||
| Rajesh.R | |||
| Raja Ganesh.T | |||
| 36 | Pasupathi.T | Noise and Emission Control for Aqua Silencer | Thermal |
| Prakashraj.R | |||
| Ragu.K | |||
| Raman.P | |||
| 37 | Pradeep Kumar Yadav.S | Compact Industrial fork Lift | Design |
| Parthipan.S | |||
| Prasanna.P | |||
| Nijamudhin Abdullah.M | |||
| 38 | Ramanathan.S | Fabrication of Bio Composite Helmet | Composites |
| Ranjithkumar.M | |||
| Santhoshraj.S | |||
| Satheeshkumar.S | |||
| 39 | Kajamohidin | Design and Fabrication of Arecanut Climbing Machine | Design |
| Naveen Kumar.M | |||
| Sahabudeen | |||
| Sikandhar Batcha | |||
| 40 | Mohanraj | Design and Development of a Two Wheeler Operated by LPG | Design |
| Periyasamy.D | |||
| Pooventhiran | |||
| Sureshkumar.R | |||
| 41 | Santhoshkumar.S | Effect on Process Parameters of Aluminium Plate on Friction Stir Welding | Design |
| Rogan.K | |||
| Rajkumar.N | |||
| Ravi.M | |||
| 42 | Sasikumar.G | Fabrication and Characterisation of Basalt/Carbon Laminate Aluminium Reinforced Epoxy Hybrid Composite | Composites |
| Sasikumar.K | |||
| Ranjith Kumar.K | |||
| Sarathkumar.S | |||
| 43 | Sakthivel.M | Design and Fabrication of Fish Descaling and Cuttinf Machine | Design |
| Sakthivel.C | |||
| Ramkumar.M | |||
| Saravanan.T | |||
| 44 | Sanjay.K | Fabrication of Load Carrier using Gearless Power Transmission | Design |
| Sabarinathan.M | |||
| Sampath Kumar.M |
Academic Year 2017-2018
| S.No | Name of the students | Title of the project | Area |
| 1 | Abhinav.R | Design and Fabrication of Highways Wind Turbine | Design |
| Ajith Kumar.R(29.5.97) | |||
| Ajithkumar.S | |||
| Bharath.C | |||
| 2 | Balachandar.K | Fabrication and Analysis of Leaf Spring by using Metal Matrix Composite Material | Design |
| Aron Ignatius.L | |||
| Anilkumar.V | |||
| Anantharaj.P | |||
| 3 | Chakaravarthi.S | Design and Analysis of Mulberry Leaves Collecting Truck | Design |
| Dinesh.S | |||
| Deepan Kumar.A | |||
| Dhines Kumar.P | |||
| 4 | Dhana Balan.N | Effect of Different Electrolyte on Electrochemical Machining for Metal Matrix Composite | Machining |
| Dheeban.S | |||
| R.Dhivahar | |||
| Gokul.P | |||
| 5 | Arulmani.P | Design of DTH Drill Bit | Design |
| Arun Kumar.M | |||
| Anand.V | |||
| Abishek Annamalai.T | |||
| 6 | Arun Kumar.V | Optimization of Micro-EDM Process Parameters by using Multi- Criteria Decision Making Methods | Machining |
| Anand.G | |||
| Arun.G | |||
| Alex Vivian.V | |||
| 7 | Ashik.A | Design and Fabrication of Drainage Cleaner | Design |
| Balamohan.R | |||
| Balamurugan.M | |||
| Genga Rajesh.M | |||
| 8 | Aravinth.G | Fabrication and Investigation of Natural Fibre Composite Based Brake | Design |
| Dinesh Kumar.R | |||
| Dharamadurai.S | |||
| Gokul Kumar.M | |||
| 9 | Gowtham Anand.G | Experimental Investigation on Wastage of Cooking Oil as a Fuel in Diesel Engine | Thermal |
| Ankit Lal | |||
| Divya.T | |||
| Chandra Priya.C | |||
| 10 | Arun Raj.S | Analysis of Torque Sensor Problem in Turboprop Engine | Design |
| Ajit Kumar.J | |||
| Anbu Viknesh.A.P | |||
| Ajith.K | |||
| 11 | Alif Khan | Effect of Bone Particles on the Properties and Microstructure of Bone Particulate Composite | Composites |
| Dhinesh Kumar.B | |||
| Duraimurugan.R | |||
| Boopathi.P | |||
| 12 | Chandru.S | Fabrication and Mechanical Behavior Study of Fiber Reinforced Composite for Marine Application | Composites |
| Chenna Krishnan.G | |||
| Gowthaman.K | |||
| Andrew Suraj.S | |||
| 13 | Arul Ganesh.S | Exoskeleton | Design |
| David .C.P | |||
| Arunan.S | |||
| Aditya Kumar.R | |||
| 14 | Ajith Kumar.R(10.4.97) | Design and Analysis of Mulberry Leaves Auto-Cutter | Design |
| Elumalai.B | |||
| Bharath.I.S | |||
| 15 | Ajith Kumar.R (13.11.96) | Accelerometer Controlled Wheel Chair for Disabled Person | Design |
| Arunesh.S | |||
| Aravind.S | |||
| Deepanchakarvarthy.K | |||
| 16 | Balaji.K | Production of Bio Diesel From Annona Squamosa and Ziziphus Seeds for Investigating The Performance Analysis | Production |
| Arun.S | |||
| Anbarasan.G | |||
| Bala Aravind.K | |||
| 17 | Abdul Basith.A | Dynamic Analysis of Crank in Composite Material | Composites |
| Baskar.M | |||
| Ashwathaman.T.S | |||
| Gokul Kumar.M | |||
| 18 | I.Mohammed Anees | Optimization of EMM Parameters for Generating Micro holes on Copper | Machining |
| K.Murugan | |||
| S. Nithyanandan | |||
| H.Senthilvel | |||
| 19 | P.K. Raveenther | Fabrication of Turbocharge in Two Wheelers | Design |
| M.Pavalanathan | |||
| V.Ramguru | |||
| S. Sathish Prasanth | |||
| 20 | S. Ravi Kumar | Process Optimization of EMM Parameters for Producing Micro Holes on Brass | Machining |
| J. Rudhra | |||
| S. Saravanamani | |||
| M.Sridharan | |||
| 21 | Mrityunjay Kumar | Hydraulic Lift with Power Booster | Design |
| R. Niraj Kumar | |||
| Raj Kumar Yadav | |||
| K.Ramakrishnan | |||
| 22 | V.Mugunthan | Design and Fabrication of Motorized Rolling Shutter | Design |
| V.Prabhu | |||
| S.Rangesh | |||
| K.Surya Prakash | |||
| 23 | S.Mohan | Fabrication of Tilting Independence Suspension System | Design |
| B.Natarajan | |||
| M. Prince | |||
| S.Ranjith Kumar | |||
| 24 | R.Mohan | Investigation and Examination of Aluminium Hybird Metal Matrix Composite | Composites |
| S.V.Mugundhan | |||
| P.Navalar | |||
| C.Pown Raj | |||
| 25 | Venkatesh.P | Design of Regenarative Braking System | Design |
| Suresh M | |||
| Ponnuvel.M | |||
| Vijay.S | |||
| 26 | Sriram P | Android Based Robotic Arm | Design |
| Sathish M | |||
| Senthil Murugan M | |||
| Tamilarasu R | |||
| 27 | Santhosh Kumar U | Papaya Seed Oil Biodiesel and its Blends Used in Diesel Engine | Thermal |
| Sathiriyan R | |||
| Tamilarasan S | |||
| Sathish S | |||
| 28 | Tamilselvan.B | Reverse Gear in Two Wheeler for Physically Challenged People | Design |
| Vaitheeswaran.P | |||
| Vissnu.S.S | |||
| Nandhakumar.S | |||
| 29 | Vignesh D | Vehicle Starting System Based on Finger Print | Design |
| Vinoth T | |||
| Yugan.R.N | |||
| Tamilselvan.M | |||
| 30 | Subash R | Andriod Based Hydraulic Control Exo Skeleton Arm | Design |
| Stalin Arul Raj I | |||
| Siddeshwaran S | |||
| Santhosh K | |||
| 31 | Selvakumaran K | Design and Fabrication of Pallet Machine | Design |
| Senthilkumar S | |||
| Thiliban R | |||
| Tamilselvan S | |||
| 32 | Vidyapathi.A.T.S | Solar Powered Grinding Machine | Design |
| Vignesh.V | |||
| Vimalkumar.R | |||
| Thilakraj.S | |||
| 33 | Santhosh S (1997-03-01) | Extraction of Biofuel From Waste Plastic | Thermal |
| Sathish Kumar M | |||
| Sivaperumal P | |||
| Tamilmaran A | |||
| 34 | Venkatesh R | Fabrication of Power Generation using Maglev Wind Mill | Design |
| Vishnupriyan G | |||
| Yogesh S | |||
| Vignesh.P | |||
| 35 | Santhosh S (1996-09-08) | Treatment of Grey Water by Recycling Method and Reuse | Design |
| Santhoshkumar S | |||
| Saravanan S | |||
| Sathiya Moorthy B | |||
| 36 | Thirumoorthi S | Motorised Chain Mechanism Hacksaw | Design |
| Vetrivel R | |||
| Vasanthakumar K | |||
| Sathish P | |||
| 37 | Suresh R | Design and Fabrication of Attachable Wheel Chair Automator | Design |
| Suriya V | |||
| Tamilarasan R | |||
| Tamilselvan J |
Academic Year 2016-2017
| S.No | Name of the students | Title of the project | Area |
| 1 | Chandru A | Design and Fabrication of Soft Flow Dyeing Machine | Design |
| Choutrigoutham Raja | |||
| Dineshkumar T | |||
| Elayabharathi K | |||
| 2 | Allavudeen P | Design and Fabrication of Stair Case Lifting Trolley with Suspension System | Design |
| Arunkumar R | |||
| Balakrishnan V | |||
| Dhinesh K | |||
| 3 | Arulselvan R | Power Generation From Exhaust Gas | Thermal |
| Arafath N | |||
| Dinesh T | |||
| Gopi S | |||
| 4 | Aathinarayanan B | Design and Fabrication of Hybrid Vehicles | Automobile |
| Abisheik K | |||
| Ahamedmasood A | |||
| Arumugam R | |||
| 5 | Ajithkumar D | Alternative Fuel Feeding System for KLIN | Thermal |
| Ajithkumar G | |||
| Arun M | |||
| Dineshkumar P | |||
| 6 | Ajith S | Fabrication of Turbocharger in Two Wheeler | Thermal |
| Ajithkumar V | |||
| Akmalbasha D | |||
| Asaruthin A | |||
| 7 | Dhinesh A | Life Extension of Boiler in 210mw | Thermal |
| Ganapathi J | |||
| Boobalan M | |||
| Gokulnath P | |||
| 8 | Aravidh P | Design and Fabrication of 360 Degree Rotation Vehicles | Design |
| Dhanasekar R | |||
| Elumalai K | |||
| Dinesh M | |||
| 9 | Aravinth M | Fabrication of Multipurpose Machine Drilling, Grinding and Cutting. | Design |
| Balasupramaniyan | |||
| Aravinthkumar E | |||
| Vasanthan S.A | |||
| 10 | Ajithkumar R | Design and Fabrication of Gearless Transmission System | Design |
| Ashokmoorthy S | |||
| Ayyappan B | |||
| Deivendiran K | |||
| 11 | Chinrasu S | Effect of Welding Process on Mechanical and Metallurgical Properties of Copper Alloys | Design |
| Dhivirupan K | |||
| Arunkumar D | |||
| Dinesh C | |||
| 12 | Aravind R | Design and Fabrication of Chainless Drive cycle | Automobile |
| Balachandar K | |||
| Bharathan R | |||
| 13 | Ashishyadav | Design and Development of Electromagnetic Braking System | Design |
| Aswin M M | |||
| Delhibabu V | |||
| Farzeenfabeer | |||
| 14 | Boobalan R | Design and Fabrication of Power Generator Through Speed Breaker Using Crankshaft Mechanism | Design |
| Dharmendrakumar | |||
| Ajithkumar R | |||
| 15 | Jeganathankarthikeyan M | Evaluation On Mechanical Properties of Sisal Fiber Using Alkali Chemical Treatment | Design |
| Koushik M | |||
| Kabilan P | |||
| 16 | Jeeva S | Experimental Study on The Vibration Characteristics on the Cryogenic Treated and Non Treated Aluminium | Design |
| Kannan G | |||
| Jagadheswaran S | |||
| Mahesh M | |||
| 17 | Karthick D | Fabrication of Multi Operation Machine | Design |
| Karthick M | |||
| Logeshchowthry P | |||
| Kesavaraj P | |||
| 18 | Maheshwaran K M | Fabrication of Aqua Silencer | Design |
| Karthikeyan A | |||
| Kesavan G | |||
| 19 | Kaviyarasan S | Design and Fabrication of Ladder Elevator | Design |
| Kaviram J | |||
| Kavin M | |||
| Kumaran V | |||
| 20 | Imran S | Design and Fabrication of Three Way Tipper Mechanism | Design |
| Jayaprakash E | |||
| Kalidasan J | |||
| 21 | Jeganath S | Design and Fabrication of Multi-nut Remover and Tighter | Design |
| Harish N | |||
| Kripakaran G | |||
| Karthick M | |||
| Manikandan P | Electro Chemical Micro Machining of an Alloy | Design | |
| Mathan S | |||
| Karthikeyan K | |||
| Karthikraja R | |||
| 22 | Kaviprakash K | Optimization of Dissimilar Metal Welding Process Parameters | Design |
| Hameeth Khan A | |||
| Kalaiyarasan S | |||
| Karthi R | |||
| 23 | Gowtham N | Mechanical Analysis of Aluminium 6065 with Silicon Carbide and Flyash | Design |
| Gokul C P | |||
| Gokulan R | |||
| Gobi C | |||
| 24 | Hariganesh V | Experimental Investigation and Fiber Loading on Mechanical Properties of CFF/Wood Dust Reinforced Composites | Design |
| Gopinath B A | |||
| Jagan Rao H | |||
| Harish V | |||
| 25 | Hariharan B | Fabrication of Differential Reverse Locking System in Automobile. | Automobile |
| Jayabalan R | |||
| Gunaseelan P | |||
| Haribaskar M | |||
| 26 | Gopinath M | Fabrication of Modern Tipper with 180º Rotation | Design |
| Gopalakrishnan R | |||
| Gokulnath M | |||
| Hariprasath S | |||
| 27 | Ganapathy C | Design and Fabrication of Mini Bike | Automobile |
| Karuppasamy M | |||
| Gowthaman A | |||
| 28 | Manivanan.G | Performance Study of Micro ECM Process To Drill Micro Holes | Design |
| Mukesh.P | |||
| Murugapandian.G | |||
| Naidu Ganesh.K | |||
| 29 | Nikhil.B | Design and Fabrication of Semi-Automatic Drain Water Cleaner for Floating Materials Design | Design |
| Murali.K | |||
| Murugan.G | |||
| Mohammed Ameen.H | |||
| 30 | Mohan Kumar.A | Micro Structure and Mechanical Properties Investigation of Hybrid Materials Made of A413 Alloy | Design |
| Mari Ganesh.P | |||
| Mugilan.V.J | |||
| Suresh.S | |||
| 31 | Naveen Kumar.R.G | Effective Utilization of Heat Loss Recovery in 100- Ton Rotary Kill Using Silica Aero – Gel | Design |
| Naveen.T.S | |||
| Prabhakar.A | |||
| Melan.G | |||
| 32 | Nandhakumar.R | Design and Fabrication of Highway Vertical Axis Wind Turbine | Design |
| Naveen Kumar.S | |||
| Prabakar.V | |||
| Mukesh.M | |||
| 33 | Prakash.S | Design and Fabrication 3D Printing of Two Wheeler Sprocket Using PLA Material | Design |
| Prakash.P | |||
| Naveen Kumar.M | |||
| Prakash.M | |||
| 34 | Rajmohan.S | Design and Analysis of Square Hole Drilling Machine | Design |
| Pravinantony.A | |||
| Pushpanathan.T | |||
| Prasanna.S | |||
| 35 | Manigandan.J | Fabrication of 90 Degree – Turn Four Wheel Steering Mechanism for Automobile | Automobile |
| Palani.U | |||
| Muthu.P | |||
| Prasanth.K | |||
| 36 | Naveen Kumar.V | Fabrication of Refrigeration System with Multi-Purpose Application | Thermal |
| Mohamed Raffek.M | |||
| Mohanavadivelu.S | |||
| Mukesh.M | |||
| 37 | Poovarasan.S | Design and Fabrication of Automated Trolley | Design |
| Palanisamy.S | |||
| Naveen Kumar.G | |||
| Mullaivendhan.R | |||
| 38 | Prasanth.S | Tribological Behaviour of Wear Performance of Aluminium Hybrid Metal Matrix Composite | Design |
| Praveen Kumar.G | |||
| Purusothaman.R | |||
| Praveen.J | |||
| 39 | Rajesh Kumar.G | Pedal Powered Reverse Osmosis Water Purification | Thermal |
| Ramesh.M | |||
| Ponmani.B | |||
| Prasanth.M | |||
| 40 | Malan.S | Experimental Analysis and Optimization of Heat Treatment in LM 25 Aluminium Alloy | Design |
| Mariyappan.R | |||
| Prabhakaran.J | |||
| Nandhakumar.A | |||
| 41 | Sakthivel S | Fabrication of Al7075 with Flyash and E-Glass Fiber | Design |
| Sasi Kumar K | |||
| Sathishkumar N | |||
| Shudhankumaar J | |||
| 42 | Shankar K | Evaluation of Mechanical Properties for Jute, Coir and Glass Fibre Reinforced with Polymer Matrix Composite | Design |
| Singaravel S | |||
| Sivaneasan R | |||
| Siva Sakthi G | |||
| 43 | Ranjith Kumar S | Fabrication of Material Handling Device | Design |
| Sellamuthu B | |||
| Sivasakthivel M S | |||
| Srinivasan K | |||
| 44 | Ram Prasath T S | Material Optimization of Steering Yoke | Design |
| Selvakumaran A | |||
| Sharukhan A | |||
| Santhoshkumar.M | |||
| 45 | Saifudeen A | Pedal Powered Grinding and Portable Air Compressor | Thermal |
| Sasikumar N | |||
| Surendhar M | |||
| Suresh M | |||
| 46 | Priya.N | Fabrication of Vertical Axis Wind Water Pumping System | Design |
| Rekha.R | |||
| Sethupathi.S | |||
| 47 | Raj Prakash R | Fabrication of Automatic Stamping Machine By Using Inversion of Slider Crank Mechanism | Design |
| Revanth P | |||
| Saravana Kumar S | |||
| Saravanan V | |||
| 48 | Ragulprasath P | Experimental Investigation On Diesel Engine Fuelled by Jamun Seed Biodiesel | Thermal |
| Revanth M | |||
| Rudhresh V C | |||
| Sakthivel V | |||
| 49 | Sathish P | Optimization of Micro EDM Process Parameters Using MCDM Methods | Design |
| Sathyaseelan R | |||
| Selvakumar D | |||
| Shanmughan P | |||
| 50 | Sadhamhussain | Investigation of Hybrid Metal Matrix Composite Using Stir Casting Method | Design |
| Saravana Kumar G | |||
| Rehan Ahmed | |||
| Rashid Rehman | |||
| 51 | Rakul G | Fabrication of Four Wheel Steering with Three Modes Control System | Automobile |
| Rasa R | |||
| Sathes Kumar C | |||
| Santhose Kumar | |||
| 52 | Rajkumar A | Fuel Less Heat Energy | Thermal |
| Rajkumar R | |||
| Sathishkumar M | |||
| Sivarasan R | |||
| 53 | Raja M | Design and Fabrication of Solar Energy Tracking System | Design |
| Ranjith Kumar R | |||
| Saravana Kumar P | |||
| Sathish Kumar S | |||
| 54 | Thennarasu V | Analysis of Aluminium Rock Dust Composite Material | Design |
| Vignesh E | |||
| Sureshkumar T | |||
| Vasanth P | |||
| 55 | Srinath T | Design of Automatic Drain Garbage Cleaner and Recycling | Design |
| Venkatesh R | |||
| Venkatesh S | |||
| Vasanthakumar G | |||
| 56 | Vignesh O A | Modeling and Design of Solar Power Cycle | Design |
| Vasanth P | |||
| Subash R P | |||
| Vignesh Kumar S | |||
| 57 | Vijay P | Design and Fabrication of Hybrid Air Cycle | Design |
| Vignesh M | |||
| Vijaya Kumar K | |||
| Vinoth Kumar G | |||
| 58 | Vijayaragavan K | Design and Fabrication of Air Driven Engine | Thermal |
| Vijaya Kumar | |||
| Vijaya Kumar S | |||
| Yaserarafath I | |||
| 59 | Velu R | Foldable Sliding Gate Using Sensor | Design |
| Vasanth K | |||
| Tamizharasan K | |||
| Veeramani S | |||
| 60 | Yokesh A | Design of Automatic Packing Process | Design |
| Yogeshwaran R | |||
| Vignesh K | |||
| Tamilselvan M | |||
| 61 | Vigneshwaran R | Solar Powered Conversion of Salt Water into Purified Water | Design |
| Palani Kumar A | |||
| Vinoth Kumar N | |||
| Vijayarahavan V | |||
| 62 | Tamilselvan M | Design of Solar Water Pumping for Irrigation | Design |
| Thirusakthivel M | |||
| Sudharsan V | |||
| Venkatesan S |
Academic Year 2015-2016
| S.No | Name of the students | Title of the project | Area |
| 1 | Alexpandi M | Fabrication of Aluminium Metal Matrix Composite by Using Stir Casting Method For Hand Lever | Design |
| Charlesraja | |||
| Karthik B | |||
| 2 | Kalaiyarasan M | Production Capacity Enhancement in Assembly Line | Production |
| Karthikeyan K | |||
| Karthikraja.V | |||
| Kiran Kumar R | |||
| 3 | Dinesh Kumar V | Emission Control using AD Blue Solution | Thermal |
| Elango T M | |||
| Elavarasan A | |||
| Karthick.S | |||
| 4 | Dhivakar S | Fabrication of Stirling Engine with Parabolic Collector | Design |
| Dinesh M | |||
| Gokul V | |||
| Karthi K | |||
| 5 | Gopi P | A Study of the Abrasive Resistance of Ceramic Oxide Coating Deposited on AISI 1040 Steel Substrate | Material Science |
| Jagan C | |||
| Kanakarasu S | |||
| Kathiresan D | |||
| 6 | Balamurali. P | Design Development & Analysis Using Plasma Process of Elliptical Leaf Spring with Fatique and Vibration Analysis | Design |
| Manikandan. M | |||
| Manoj Kumar. M | |||
| Vasanthan. S | |||
| 7 | Allabaksh R | Redesigning of Butting Block | Design |
| 8 | Abey Anto | Design & Simulation of Automobile Active Suspension System | Design |
| Deepak Kumar | |||
| M S Dhananjay | |||
| Donald Antony | |||
| 9 | Balaji Lalooprasad.A | Differential Unit Locking System | Automobile |
| Jayapriyan G | |||
| Suresh. R | |||
| Ayyanar. S | |||
| 10 | Akash M | Experimental Analysis of Heat Transfer Development in Circular Double Tube Exchanger | Thermal |
| Anand S | |||
| Arul S | |||
| Deepan Raj P | |||
| 11 | Aravind S | Design and Analysis of Light Duty Vehicle Wheel Alloy Design | Design |
| Athi Moolam T | |||
| Deepan Raj S | |||
| Divagar E | |||
| 12 | Ashok Kumar T | Conversion of Plastic Fuel & Performance Analysis on VCR Engine with Blend of Diesel | Thermal |
| Bairavan M | |||
| Murugavel.T | |||
| Ambrish R | |||
| 13 | Elavarasan S | Fabrication of Gate by Gear and Pulley Operation | Production |
| Jegadheesan G | |||
| Kumar G | |||
| Suresh. P | |||
| 14 | Ajith Kumar R | Investigation of Wear Resistance of Ceramic Coated Cylinder & Piston of IC Engine. | Thermal |
| Arun C | |||
| Gokulakannan K | |||
| Kamalakannan K | |||
| 15 | Gowtham J | Experimental Investigation and Analysis of Connecting Rod by Using Hybrid Metal Matrix Composite | Design |
| Hemkumar N | |||
| Kanagaraj N | |||
| Sudhendren. T | |||
| 16 | Ajith R | Optimization Process Parameter in EDM Process Using Multi Criteria Decision Making Methods | Machining |
| Ananda Kumar S | |||
| Azhagesan S | |||
| Dhibakar M | |||
| 17 | Aravintharaj S | Performance Analysis of Helical Feeding Pulverizer | Design |
| Karthikeyan R | |||
| Sathish Kumar. S | |||
| Chandiramouli A | |||
| 18 | Agalya P | Design & Optimization of Plastic Mixing Machine | Design |
| Vennila D | |||
| 19 | Anish V | CFD Simulation of Heat Transfer Enhancement in Circular Tube with Twisted Tape Insert by using Nano Fluids | Design |
| Kabilan S | |||
| Dhayalan B | |||
| 20 | Ranjithkumar K | Design and Fabrication of Automatic Pallet Changer | Design |
| Murugaraj S | |||
| Mozhi Alagan A | |||
| Rajamuthu S | |||
| 21 | Praveen Kumar T | Burr Removal Processes During Micro Machining | Machining |
| Prakash M | |||
| 22 | Vignesh. R | Power Generation from Exhaust Fan | Automobile |
| Nijanthan. U | |||
| Manikandan.P | |||
| Mahakrishnan. S | |||
| 23 | Mohana Pratheep A | Automatic Plantation of Alliumcep(Onion) | Machining |
| Prabhu D | |||
| Mohamed Niyas S | |||
| Mohammed Thahir M | |||
| 24 | Manivannan P | Fabrication of Human Wastage and Material Collector in Railway Track | Design |
| Periyasamy R | |||
| Saai Kumar A M V | |||
| Raja.R | |||
| 25 | Kumar J | Experimental Investigation of Wear Resistance of Cylinder and Piston in IC Engine | Thermal |
| Kumar.R | |||
| Madeshwaran S | |||
| Manojkumar P | |||
| 26 | Pradeepkumar P | Air Engine | Thermal |
| Sankar M (25.04.94) | |||
| Pradeep V | |||
| Manmathan S | |||
| 27 | Nikil P Simon | Design and Analysis of Heat Exchanger | Design |
| Muhammed Kashif Minhaj C | |||
| Muthuraman M | |||
| Pandikannan M | |||
| 28 | Magesh R | Power Generation in Shock Absorber | Design |
| Leyakath Ali B | |||
| Natarajan G | |||
| Pradeep S | |||
| 29 | Sampath E | Fabrication of Vertical Axis Wind Turbine Vertical Axis Wind Turbine | Thermal |
| Manikandan M | |||
| Manoj Kumar. P.K | |||
| Sankar M | |||
| 30 | Ramprabakaran R | Increasing Wearing Life of Coil Winding Spindle | Machining |
| Ajo Philipose Johnson | |||
| Tamilarasan. M | |||
| Naveen Kumar. D | |||
| 31 | Muthaiyan.N | Fabrication of Compressed Air Driven Engine | Design |
| Raj Kumar M | |||
| Raja T | |||
| Ramthilak R | |||
| 32 | Navin Kumar S | Mechanical Properties of Rubber Composites(Nitraline & Butadiene) | Composites |
| Santhosh G | |||
| Govindaraj C | |||
| Nikil C | |||
| 33 | Sakthivel G | Multi Fuel Single Cylinder Engine Run by Petrol and LPG Gas | Thermal |
| Rajkumar D | |||
| Ragesh D | |||
| Sameer Riyas.M | |||
| 34 | Ragul M | Optimization of 4 Stroke Single Cylinder Diesel Engine Using CFD | Design |
| Ragavan R | |||
| Natarajan V | |||
| 35 | Md Shaban Alam | Automatic Rain Operated Wiper | Design |
| Meghanka Mili | |||
| Ragul S | |||
| Palanivel T | |||
| 36 | Lokeshwaran M | Pneumatic Crane Crusher | Design |
| Manikandan V | |||
| Naveen Kumar C | |||
| Pandeeswaran N | |||
| 37 | Naveenchandhar S | Fabrication of Gearless Drive | Design |
| Rajesh V | |||
| Narayanan S | |||
| Karthick Samydev. P.S | |||
| 38 | Sivagurunathan V | Design and Fabrication of Chassis of Solar Vehicle | Design |
| Soundhara Rajan D | |||
| 39 | Selvamani P | Design and Fabrication of Automated Arbor Press Machine | Design |
| Shighil Babu | |||
| Vinith T | |||
| Vishnu Manoj | |||
| 40 | Shriswaroop S | Optimization of EDM Process Parameters | Machining |
| Siva S | |||
| Tamil Selvan M | |||
| Utkarsh Panicker | |||
| 41 | Saravanan P(7/5/93) | Design and Fabrication of Bio – Gas Plant | Design |
| Suresh I | |||
| Veemamuthukani K | |||
| Vinothkumar J | |||
| Kirubaharan.E | Solar Powered Grinding & Polishing Machine | Thermal | |
| Praveenkumar.C | |||
| Rajakannu.M | |||
| Shiranjeevi.K | |||
| 42 | Santhoshkumar A | Implementing the Combination of Emergency Intelligence & Anti – Lock Braking System | Design |
| Saravanan G | |||
| Sasikumar P | |||
| Suseendar Raj A V | |||
| 43 | Sree Kumar B | Design and Analysis of Fracture in Connecting Rod | Design |
| Venkatesh R(09/11/95) | |||
| Vijayakumar D | |||
| Yogesh R | |||
| 44 | Venkatesh N | Design and Fabrication of Solar Air Cooler | Design |
| Victor Vimalesh D | |||
| Vignesh R | |||
| Vignesh S | |||
| 45 | Thirunavukkarasu R | Fabrication of Pelton Wheel Turbine | Design |
| Vigneshkumar M | |||
| Vijay M | |||
| Murugavel.V | |||
| 46 | Sasikumar S | Fabrication of Fork Lift | Design |
| Vignesh V | |||
| Vinoth Kumar M | |||
| Vigneshgopal P | |||
| 47 | Srinivasan.V | Thermal Power Plant | Thermal |
| Subash V | |||
| Venkatesh R(25/05/95) | |||
| Vishnu D | |||
| 48 | Sundaramoorthy P | Design and Fabrication of Suspension System in Electric Solar Vehicle | Design |
| Triny G | |||
| Venkatachalapathi A | |||
| Vijay R | |||
| 49 | Saravanan P(6/6/95) | Study of Microstructure and Mechanical Properties of SiC & Al2O3 of Al Hybrid Composites | Composites |
| Sebulone Raj R | |||
| Sriram A | |||
| Thirupathy C | |||
| 50 | Sathish Kumar M | Design and Fabrication of Braking System in Solar Car | Design |
| Selvakumar D | |||
| Sugumar M | |||
| Vizhiyarasan K | |||
| 51 | Manikandan.N | Fabrication of Pneumatic Operated 2 Wheeler with Chain Drive | Design |
| Sathish.S | |||
| Sureshkumar.A | |||
| 52 | Sathish K | Fabrication Tool Indexing Multi Chuck Driving Machine | Design |
| Kannan.R | |||
| Kumaravel.M | |||
| 53 | Tamilselvam R | Design and Fabrication of Automated Arbor Press Machine | Design |
| Vinoth S |